Service Technician 2 (Night Shift) (Anaheim - CA)

Clean Energy Fuels   Anaheim, CA   Full-time
This job is no longer available.
Job Posting Shared.
Job Posting Reminder Sent.

Summary
Inspect, maintain and complete repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During inspections, Service Technician II will identify and repair corrective action and/or proactive maintenance service actions required on CNG / LNG equipment. Service Tech II will participate and/or lead in major overhauls, rebuilds and startups. Service Tech II will perform Preventative Maintenance service orders with minimal supervision and escalate to Service Tech III and Master Technician as needed. Service Technician II will ensure that assigned stations are aesthetically pleasing for our customers by cleaning and wiping down equipment, removing visible trash and ensuring trash containers are emptied.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Electrical:
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.

Must have a strong working knowledge and be able to demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.

Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.

Mechanical:
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.

Must have a strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high and low pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should be have a strong understanding and be able to monitor, interpret, check and correct operational trends in reciprocating and screw type gas compressors.

Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.

General:
Make periodic inspections of fueling locations and equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.

Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment related to “Compressed Natural Gas” (CNG), “Liquefied Natural Gas” (LNG) and “Hydrogen” fueling equipment.

Clean and maintain fueling locations by: picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing of fueling equipment, painting, canopy, lots, islands, and surrounding landscaping, in and outside of enclosures.

Update and document all activity, service orders, work performed and recommendation in our Field Service Automation (FSA) software. Must be thorough and comfortable working on computer and tablets.

Install, remove and modify fueling locations and equipment.

Maintain all fueling related equipment and structures in accordance with manufactures and Clean Energy guide lines.

Drive to or between company sites to perform job responsibilities.
Coverage at other stations in neighboring states may be required due to business needs.
Other duties as assigned.

Supervisory Responsibilities
This position has no supervisory responsibilities.

Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
High School Diploma (preferred) or equivalent plus a minimum of 4 years of related or equivalent combination of education and experience.

• Must have basic Mechanical or Electrical basic / foundation knowledge
• Must have basic computer knowledge, especially using service software

Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Computer Skills
Basic knowledge of Microsoft Office applications.

Certificates, Licenses, Registrations
Valid driver’s license with a clean driving record required.

Competencies
To perform the job successfully, an individual should demonstrate the following behaviors:

Quality: Consistently produces high quality work (accurate, neat, and thorough). Strives to improve productivity, processes and quality. Demonstrates strong knowledge and skills related to the job. Presents a professional image with dress, demeanor, and manners. Maintains clean work space, company equipment and company vehicles. Safety is a high priority; performs job safely.

Communication: Communicates clearly, concisely, effectively, professionally and timely. Exhibits good listening and comprehension skills. Keeps others appropriately informed and shares ideas even when unpopular. Listens to what others have to say. Maintains open and active communication with colleagues. Effectively uses knowledge and experience in asking, probing, and anticipating issues to ensure quality is provided.

Teamwork: Fosters the spirit of working with each other. Displays respect, courtesy, politeness, tact, and openness. Handles conflict in an appropriate and professional manner. Builds relationships, promotes cohesiveness, models collaboration with others. Considers impact and issues for our customer and other departments. Engages other impacted departments early for solutions.

Persistence: Develops workable alternatives and solutions. Exhibits persistence in following assignments through to completion. Promotes process improvements.

Reliable: Responds in a timely manner. Is honest, ethical, value-driven and trustworthy. Keeps commitments made, completes assignments and meets deadlines. Accountable-- Takes responsibility for own actions and performance. Meets attendance and punctuality guidelines. Available and accessible.

Entrepreneurial: Takes initiative and appropriate action. Is engaged and committed to achieving the company’s mission. Pursues better ways to get things done and takes appropriate risks. Keeps up to date with competitor information and market trends. Controls costs and thinks in terms of profit, loss and added value. Is committed to the satisfaction of customers.

Leadership: Provides clear direction around a vision. Creates actionable plans and is proactive & anticipatory. Demonstrates innovative approaches and solutions. Is an example for employees and others. Accepts responsibility for individual and team performance. Makes appropriate and timely decisions and acts on decisions. Sets clear and reasonable performance expectations. Motivates and empowers others. Delegates tasks appropriately. Recruits staff of a high caliber. Provides feedback to subordinates that is timely and direct. Recognizes subordinates for their contributions and effort. Encourages continuous growth and learning in others. Shows respect for others and their ideas. Helps others manage through change.

Passion: Is excited and creates enthusiasm about the company’s future. Promotes a sense of company pride. Displays sense of pride in the department and its contributions. Displays passion for the job.

Physical Demands
Physical demands are customary for this type of position. Always practice good judgment and refer to the safety guidelines. The employee is frequently required to walk and sit. The employee is regularly required to stand, climb and constantly drive. Regularly use hands to finger, handle, or feel; reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee must frequently lift and/or move up to 25 pounds, regularly lift and/or move up to 50 pounds and occasionally move up to 75 pounds. Lifting over 50 pounds may require mechanical and/or second technician assistance. Moving over 75 pounds will require mechanical means, or additional employee assistance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Always practice good judgment and refer to the safety guidelines.

The noise level in the work environment is regular exposed to moderate to high noise areas.

This job is no longer available.

Clean Energy Fuels

Anaheim, CA